Made out of 1.2mm zintec

We have supplied these in bare metal so you can paint them the same colour as your Land Rover

Excellent quality made out of 304 grade stainless steel so will never rot again.

Heavy duty, good quality. Made out of 1.2 mm zinc coated mild steel

Heavy Duty, good quality made from 1.2mm zinc coated mild steel

Cut, CNC Folded and then pressed to same shape as genuine land rover

Laser cut, CNC folded - same as original

CNC Bent for accuracy.

Made out of 2mm zinc plated mild steel, to OE spec. Good quality the original ones were welded on, you can also weld these ones on or some people drill and bolt them.

Excellent quality, made in the UK by LR Bulkheads

Excellent quality, made in the UK by LR Bulkheads

excellent quality

Excellent Quality

excellent quality

Excellent quality, same thickness as original.

Excellent Quality, manufactured to OE specifications.

BARE METAL- If your sending your bulkhead for galvanizing these save a lot of work as no shot blasting is required

Excellent Quality, made to OE spec - fit like they should.

Excellent Quality, made to OE spec pressed out of 1 piece of steel

excellent quality

excellent quality

Hot dipped Galvanized bulkhead tow box support brackets

CNC Bent for accuracy.

To fit all Defender models 1983-2016 and all Series models 1958-1984

Made out of 1.5mm mild steel then pressed / rolled into shape

Originally land rover made this out of 1mm we make them out of 1.2mm zinc coated steel

A lot of land rovers only rot on the floor and do not need the full bulkhead repair panels so we made these to keep costs down when you are repairing your bulkhead if it has gone higher up then you will need to buy the full bulkhead footwell repair panels see our other listings.

Excellent quality, made in the UK here by us by LR Bulkheads